-
Fully compatible with ps2 v1-v13 PAL/USA/Jap.
-
upgrade from modbo2.1, comes with the original 100% v1.54 firmware, but it isn't upgradeable.
-
Comes with a mini size board,and the wiring point order is good for installation.
-
AUTOMATIC SELECTION for PS2/PS1/DVD SUPPORTS.
-
DVD Region Free Incorporated !!
-
Software selectable "PS2 Quick Load" option. (To skip PS2 logo and Quick boot PS2 Games!!)
-
Software selectable "PSX Quick Load" option. (To skip PS1 logo and Quick boot PSX Games!!)
-
Easy to Install. (only 18 wires for V1-V8 and 20 wires for V9, V10, V11, V12, V13)
-
CPLD Chip (3.3V power supply) based IC for enhanced stability
-
AUTOMATIC "MACROVISION=OFF" ON ALL PS2 FROM V1 TO V13 WITHOUT ADDITIONAL WIRES !!
-
AUTOMATIC "GREEN FIX" (No more need to change the cable to see your DVD movies on the PS2!!)
-
Import Games Fix (All PSX import games are played at FULL SCREEN and FULL COLOR !!)
-
STEALTH-Mode (The Modchip can be switched off and becomes invisible to Online Gaming)
-
Sleep-Mode (The Modchip will switch off itself after boot)
-
Supports DVD-9 games!!
-
PLAYS ALL THE CD’S and DVD’S Games (both, Import or Backup’s)
-
SUPPORTS MULTI-DISK GAMES !!
-
SUPPORTS ANTI-MOD PS1 GAMES !! (Only for V9 - V13 PS2)
-
Very Reliable (All the Modchips are 100% tested before delivery)
-
Very Stable (Thanks to the sleep mode the IC will never Overheat)
-
CD Lens Safe (Avoid CD lens damage by sending un-necessary signal to the Drive Controller)
-
Support dev1 and dev2 for memorycard booting!
-
Press TRIANGLE + CIRCLE to enter the configuration menu.
-
PS2 SCREEN FIX : OFF : Disables PS2 video fix.
-
COLOR : Games will be output on their original video mode (PAL/NTSC) with color correction applied to match your PS2 region.
-
PAL : Force video mode to PAL
-
NTSC : Force video mode to NTSC
-
PAL60 : Force all games to NTSC with color correction.
-
Games will run faster but screen might need adjusting.
-
Y SCREEN FIX : OFF : Y screen position fix is disabled.
-
AUTO : Y position fix enabled with default settings.
-
Should be fine for most television sets.
-
+/- N: Fine tune Y position.
-
Positive values move the screen down, Negative values move it up.
-
PSX SCREEN FIX : ON/OFF : Enable/Disable PSX screen fix
-
PSX MULTI DISK : ON/OFF : Enable/Disable PSX multi disk support
-
MC16 PATCH : ON/OFF : Enable/Disable D4TEL memory card support
-
ATAD AUTO PATCH : ON/OFF : Enable/Disable ATAD auto patch
-
MACROVISION FIX : ON/OFF : Enable/Disable Macrovision patch
-
GREEN FIX : ON/OFF : Enable/Disable green correction on DVD movies
-
DVD VIDEO REGION : 1..8 : Selects the DVD player region.
-
Use it to match the corresponding region on RCE protected discs.
-
DVD9 DL SUPPORT : ON/OFF : Enable/Disable Double Layer patch
-
BOOT MODE : AUTO : Normal behaviour. All discs wil autoboot.
-
FAST : FastBoot.
-
Same as pressing SELECT on boot.
-
INFMAN : Execute Infinity Manager on mc0:
-
Same as Pressing TRIANGLE on boot.
-
DEV1 : Execute BOOT.ELF on mc0:
-
Same as Pressing R1 on boot.
-
DEV2 : Execute BOOT.ELF on HDD
-
Same as Pressing L1 on boot.
-
DVDV : Force DVD video mode.
-
Same as Pressing CIRCLE on boot.
-
PAD DETECT TIME : 2..10 : Select time to wait for connected pad on boot.
-
Only useful if pad is left unconnected.
-
BOOT LOGO : ON/OFF : Enable/Disable Matrix boot logo.
-
DEFAULT LANGUAGE : LANG : Default language to use for FastBoot/InfMan/Dev1 mode.
