Fíjese en la siguiente foto para saber si es compatible con su PSTWO.

En este punto y el mas importante se inserta la pieza "C", si su consola pstwo dispone de ese hueco necesita uno de estos conjuntos.

Swap Magic 3.6 + Magic Tools PS2

Swap Magic 3.6 + MagicKeys Aluminio

Swap Magic 3.6 + Magics Keys

Si ya tienes los discos swap magic 3.6 puedes comprar las piezas por separado.

Slim Tools para PSTWO 7000X

Magic Keys PSTwo (SCPH-7000X) (Esta es la pagina de este producto)

Magickeys Aluminio PSTWO

Si de lo contrario en el mismo punto hay una bisagra como la que estan en las fotos usted necesita las magickeys 2

Swap Magic 3.6 + Magickeys2 Aluminio

Si ya tienes los discos swap magic 3.6 puedes comprar las piezas por separado

Magickeys 2 Aluminio

Magic Switch Introduction:

Magic Swithc Installation Demo Video (.zip format) 1) Here you can see the 3 parts to the slim tools. They are lettered A, B and C on the picture above. 2) Stickers are prepared behind Tool A. 3) A larger image to show the detail of Tool C. Please do not press the protrusive spare part of the tool. 4) On the picture above you can see the console front view opened. Here you can see where each tool takes its place. 5) Take the Tool A and stick it in the place on the picture above. 6) Now its time to set the Tool B. Please move the disk break to the right and hold it. 7) Then, please insert the Tool B in the place on the picture above. 8) On the left hand side you can see the position for Tool C. Please put Tool C in the gap. And then push it till it goes no further downwards. As a result your console is ready for playing your imports. Tips of installing Tool C Here is the tips of installing the Tool C(the biggest parts of Magic Switch). Firstly, put the Tool C in the gap. But, before you totally push it into the gap, please push it to the left first like the picture shown above(you can click the pic to enlarge)and then push it in till it goes no further downwards. If succeed, the laser lens will move downwards provided that your PSTwo is power on. If not succeed, the laser lens will not move and you need to redo all the steps again.